Products:
Control Panels
3U Camserver Joystick Control Panel Version 4
Our new version 4 control
panel has an excellent operator designed layout with an angled zoom rocker
control and high reliability contactless Joystick.
Control of camera position, lens control and camera settings are all
available depending on the configuration of the main Camserver controller.
A number of additional control functions have been added to the panel,
giving the ability to extend the control capabilities with additions to
the Camserver firmware.
The 19" panel is 3RU high, and 50mm deep.
Communication with the panel is via a RJ45 connection.
A DC power module is supplied with each panel.
Camserver Television Production System
Developed as a complete solution to control Panasonic PTZ HD camera heads our system can handle 50 cameras and 2 Joystick camera control panels, our 72 button panels and is able to control vision switches manufacturer by Snell, Harris and others to integrate the entire video production for the reality TV show requirements.
Other cameras can be controlled, other matricies used, just enquire!
Button control panels
Rotronics have developed a series of general purpose control panels for broadcast use.
24 Button panel
(R0541)
The
24 button panel is a low profile 1RU design with loop through RS422 serial
panel connection, designed with flexibility in mind.
The
buttons are high quality production desk RGB types and can be programmed
for different colours to display status information.
The panel is 55mm deep with a clip on designation strip for temporary button identification labels, alternatively the buttons used can have the caps removed and more permanent clear printed labels fitted.
In
addition to the 24 buttons, the panels have 8 GPI connections and 8 GPO
connections for interface to ancillary equipment. These inputs / outputs
are not isolated.
54 Button panel (R0580)
The 54 button panel is designed as a drop in replacement for the popular Probel / Snell 6706 control panels that are no longer in production, it will work with Aurora systems.
It has been tested working on multi-drop chains with existing ProBel panels.
Uniquely, whilst the front panel is a layered membrane type, the switches are a conventional oval design, with blue illumination and a reliable click action.
This allows the area between the switches to be configured as a built in designation strip so that printed labels can be slid into the gap between the switches and be protected by the plastic laminate.
The switch illumination is adjustable on the rear of the panel with switches.
Both foreground and background light levels are settable to suit the control room conditions.
The rear of the panel also has a 'Hex' switch to allow up to 16 multi-drop addresses to be selected.
The panels have 8 GPI connections and 8 GPO connections for interface to ancillary equipment. These inputs / outputs are not isolated.
Click to download the latest product sheet
72 Button panel (R0588)
The 72 button panel is a low profile design with loop through RS422 serial
panel connection.
The
three rows of 24 buttons are high quality production desk RGB types and
can be programmed for different colours to display status information.
The panel is 55mm deep with a clip on designation strip for temporary button identification labels, alternatively the buttons used can have the caps removed and more permanent clear printed labels fitted.
In addition to the 72 buttons, the panels have 8 GPI connections and 8 GPO connections for interface to ancillary equipment. These inputs / outputs are not isolated.
All the above panels are supplied with external DC power supplies.
For more information about any of these products please feel free to contact us.